Skip to Content
Support
CFX2 CoolersHow to connect the cooler to a battery

CFX2 Coolers

How to connect the cooler to a battery

⚠️NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove the fused DC plug. Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery before connecting the battery to a quick charging device. Overvoltage can damage the electronics of devices connected to the battery.

NOTE The cooler is equipped with an electronic system to prevent polarity reversal. The electronic system protects the cooler against short-circuiting when connected to a battery.


The cooler can be operated with 12 V or 24 V.

Connect the cooler to a battery using the DC connection cable as shown:

Besoin d'aide ?

Poser une autre questionCFX2 Coolers
Sélectionner un autre produit
Sitemap
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use