Skip to Content
Support
Harrier Air ConditionersHow to: Set the timer
Harrier Air Conditioners

Harrier Air Conditioners

How to: Set the timer

The timer function allows you to set a specific time period for air conditioning. You can specify the number of hours until the air conditioner will be switched on and the number of hours until the air conditioner will be switched to stand-by (up to 24 hours).

NOTE: The remote control returns to its initial mode if no button is pressed on the remote control for 15 seconds while programming the timer.

  • Before programming the timer, select the air conditioning mode and all required values (e.g. temperature).


Setting the switch-on and switch-off time
➤ Press the button three times.
✔ The ON symbol flashes on the display of the remote control.
➤ Use the + or – button to set the time when the roof air conditioner is to switch on.
➤ Press the button again to confirm the value.
✔ The switch-on time is set on the roof air conditioner. The roof air conditioner is switched on with the selected air conditioning mode at the specified time.
✔ The OFF symbol flashes on the display of the remote control.

If no OFF time is needed press the button again without changing the hour value.
➤ Use the + or – button to set the number of hours until the air conditioner will be switched to stand-by.

➤ Press the button to confirm the value.

✔ The switch-off time is set on the roof air conditioner.
Switch the roof air-conditioner to Stand-by.


Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the button four times.
✔ The timer symbol disappears.
✔ The setting has been cancelled.


Besoin d'aide ?

Poser une autre questionHarrier Air Conditioners
Sélectionner un autre produit
Sitemap
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use