Skip to Content
Water Heaters - GasHow to clear a water heater over-heating failure

Water Heaters - Gas

How to clear a water heater over-heating failure

If the Water Heater fails to operate due to high-water temperature, a lockout condition will occur. Investigate the cause of overheating and correct the issue before resetting the Water Heater.

Allow water to cool (this can take up to 30 mins).

Place the control switch in the OFF position and wait 30 seconds.

Turn the control switch to the ON position.

If the lockout condition persists: See "Maintenance and Care Instructions".

Besoin d'aide ?

Poser une autre questionWater Heaters - Gas
Sélectionner un autre produit
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use