Skip to Content
Support
Americana RefrigeratorsHow to remove and replace the shelves
Americana Refrigerators

Americana Refrigerators

How to remove and replace the shelves

RM2351 RM2354 RM2451 RM2454 RM2551 RM2554 DM2652 DM2662 DM2663 DM2852 DM2862 NDM1062

1
Remove the shelf locks by inserting the tip of a flat bladed screwdriver into the slot of the locks. Turn the screwdriver counterclockwise and then remove the shelf locks from the wire shelf.

2
Tilt the shelf to one side at an angle while pulling forward.

3
Reposition the shelf in the desired location. Insert the ends of the wire shelf on the left-hand side and slide the shelf into the holes on the right-hand side.

4
Slide the plastic plugs into the holes of the wall.

5
Snap the shelf locks onto the wire shelf.

DM2672 DM2682 DM2683 DMA4061 DMA4064 DMA4067 DMA4068 DM2872 DM2882 DMA4081 DMA4084 DMA4087

1
Remove the shelf locks by inserting the tip of a flatbladed screwdriver into the slot in the locks.

2
Turn the screwdriver counterclockwise and remove the shelf locks from the wire shelf.

3
Slide the shelf to the left until the plastic caps
disengage.

4
Tilt the shelf to one side at an angle while pulling forward.

5
Reposition the shelf in the desired location.

6
Insert the ends of the wire shelf on the left-hand side and slide the shelf into the holes on the righthand side.

7
Slide the plastic caps into the holes of the wall.

8
Snap the shelf locks back onto the wire shelf.

Avete bisogno di ulteriore aiuto?

Porre una domanda diversaAmericana Refrigerators
Selezionare un altro prodotto
Sitemap
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use