Skip to Content
Support
Water Heaters - Combo Gas & ElectricHow to clear a water heater over-heating failure

Water Heaters - Combo Gas & Electric

How to clear a water heater over-heating failure

If the Water Heater fails to operate due to high-water temperature, a lockout condition will occur. Investigate the cause of overheating and correct the issue before resetting the Water Heater.

1
Allow water to cool (this can take up to 30 mins).

2
Place the control switch in the OFF position and wait 30 seconds.

3
Turn the control switch to the ON position.

If the lockout condition persists: See "Maintenance and Care Instructions".

Avete bisogno di ulteriore aiuto?

Porre una domanda diversaWater Heaters - Combo Gas & Electric
Selezionare un altro prodotto
Sitemap
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use