Skip to Content
Support
RUA RefridgeratorsHow to remove and refit the shelves?
RUA Refridgerators

RUA Refridgerators

How to remove and refit the shelves?

Remove the shelves

1.
Push the shelf locks off the left end of the wire shelf.

2.
Slide the shelf to the left until it is clear on the right side.

3.
Tilt the right end of the shelf up.

4.
Remove the shelf by pulling it forward.


Refit the shelves

1.
Position the shelf in the desired location and insert the ends of the shelf on the left.

2.
Slide the shelf into the holes on the right.

3.
Slide the plastic plugs into the holes in the wall.

4.

Snap the shelf locks onto the shelf.


Positioning the bottle shelf

NOTE
The two bottom shelf positions can be fitted into an optional bottle shelf configuration which slopes down toward the rear.

1.
Remove the shelf and rotate 180 degrees.

2.
Relocate the rear of the shelf to the bottle shelf position.

Heb je meer hulp nodig?

Stel een andere vraagRUA Refridgerators
Selecteer een ander product
Sitemap
SupportSupport & ServiceFrequently asked questionsWarrantyFind a dealer
Privacy PolicyCookie NoticeTerms & ConditionsTerms of Use