Skip to Content
Brisk Air Conditioners
How to reset the system (COMFORT CONTROL CENTER 2 THERMOSTAT)
When your unit was installed the appropriate dip switches on the electronic control board were turned ON to match your system configuration. Any time these settings are changed, a system reset will need to be done before the CCC 2 thermostat will recognize the updated selection.
To do a system reset:
Make sure the CCC2 thermostat system is powered down completely. It should NOT read OFF."
Simultaneously press the MODE and ZONE buttons. The LCD will display “IniT” and all available zones.
Release the MODE and ZONE buttons.
Press the ON/OFF button to exit system set up.