CFX Coolers

⚠ NOTICE! Danger of overheating!

• Ensure at all times that there is sufficient ventilation so that the heat that generated during operation can dissipate. Ensure that the ventilation slots are not covered. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate.

• Place the cooler on a firm foundation. Make sure that the ventilation slots are not covered and that the heated air can dissipate.

ⓘ NOTE
Place the cooler as shown below. If you operate the box in a different orientation it can be damaged.

• Connect the cooler. Refer to the guide in "How to connect the cooler" in the How-to guides.

⚠ NOTICE! Danger from excessively low temperature!

Ensure that the only those objects are placed in the cooler that are intended to be cooled at the selected temperature.

• Press the “ON/OFF” button (1, figure below) for between one and two seconds.

ⓘ The LED “P” lights up (2, figure below).

ⓘ The display (5, figure below) switches on and shows the current cooling temperature.

⚠ CAUTION! Health hazard! CFX65DZ:
If the temperature in the freezer compartment (1, figure below) is very low (–22 °C/–8 °F), the temperature range in the cooling department (2, figure below) can be below freezing as well.

NOTE Displayed temperature
• CFX28, CFX35W, CFX40W, CFX50W, CFX65W, CFX100W:
The temperature displayed is that of the large interior compartment (e.g. CFX50W, CFX65W: (1, figure below).

CFX65DZ:

• With fridge/freezer divider in: The temperature displayed is that of the freezer compartment (1, figure below).

• With fridge/freezer divider out: The actual compartment temperature will be considerably warmer than the displayed
  temperature