Opening in the tilting position

1
Press the latches on both rotary bolts and turn them 90° (A).

2
Hold the bracket in the middle and move it out of the original position (B).

3
Tilt it downwards.

4
Push the glass dome upwards (C). Opening the glass dome is supported by the two gas springs after approx. 150 mm.

5
Swivel the bracket to the glass dome and press it back into the original position (D).

💡To close it, follow the instructions in the reverse order.

Opening in the half-way position

1
Press the latches on both rotary bolts and turn them 90° (A).

2
Hold the bracket in the middle and move it out of the original position (B).

3
Tilt it downwards.

4
Push the glass dome upwards (C). Opening the glass dome is supported by the two gas springs after approx. 150 mm.

5
Open both the latches (D).

6
Tilt the bracket to the half-way position.

7
Pull the glass dome down until the bracket is lying in the holders.

8
Secure the bracket with both latches.

💡To close it, follow the instructions in the reverse order.

Opening in the continuous ventilation position

1
Press the latches on both rotary bolts and turn them 90° (A).

2
Push the glass dome upwards with both hands approx. 2 cm on both rotary bolts.

3
Turn the rotary bolt into the position provided for this (B).

💡To close it, follow the instructions in the reverse order.