⚠️Only ignite the oven and grill when the
oven door is completely open.

⚠️Keep an eye on the gas outlets while you are igniting the burner.

⚠️If the burner flame goes out accidentally, turn off the oven and wait at least 1 minute before re-igniting the burner.

Electric ignition

⚠️If the burner does not start electronically, check whether the gas cylinder is filled.

1
Open the oven door completely.

2
Make sure that the gas supply is turned on.

3
Press in the temperature regulator (1) and hold it down.

4
Turn the temperature regulator to the left into a 1 – 6 position on the temperature scale.

5
Press and hold down the temperature regulator for another 5 – 10 seconds.

✔ The burner is ignited electronically.

6
Turn the temperature regulator to the required position.

7
Close the oven door.

Set the oven temperature

NOTE

• The set temperature may deviate from the values stated below by up
  to ±20 °C.

• Immediately after the ignition in any position of the control knob, the
  flame of the oven burner is switched on at the maximum output and
  then automatically reverts to the minimum output as soon as the set
  oven temperature is reached.

• If the oven has not cooled down from previous use, the burner may
  go out straight after lighting it. In this case, blow into the burner
  opening to get rid of the steam.

• Ignite the oven again.

Set the required temperature using the temperature regulator.